Panel measuring and registering instruments with internal archive, built-in electricity meter, optional remote communication

SMZ 33 universal power meter and datalogger is ideal for monitoring and recording (data logging) of voltages, currents, power factors, frequency, powers, harmonic distortion of voltage and current, energies etc in three-phase LV, HV, VHV grids. It can also measure and record temperature and state of its inputs/outputs.

All measured values are stored in the instrument and can be later downloaded for processing using a remote communication line and the ENVIS application. SMZ is larger (144x144mm) panel mounted analyser. It has a high contrast LED display suitable for rough environments and precise energy consumption monitoring with preriodic reading capability = stores load profiles among other information. 

 

Related Documents

Characteristics

True root-mean-square values of voltage and current (TRMS)

Both true power factor (PF) and power factor of fundamental harmonics (cos fi)

Total Harmonic Distortion and harmonics of voltage and current up to the 25th order

Viewing actual values on the display and record into the memory of up to 1MB capacity

Two relays with programmable function

Local RS-232 or remote RS-485 communication link

MODBUS communication protocol

High contrast LED display with large digits

Built-in three-tariff four-quadrant electricity meter

registers active energy (kWh - import/export) and reactive energy (kVArh - inductive/capacitive)

Two analog outputs 0/4-20 mA with programmable function ("A"-model only)

Device Types

Feature Description

These instruments are suitable for monitoring and recording voltages, currents, power factors, powers, electric energy, TDH, harmonic components and temperatures in low-, high-, possibly very-high-voltage three-phase mains.

Up to three voltage inputs of nominal value up to 440 V AC, three fully isolated 1-ampere / 5-ampere AC current inputs (from measuring transformer outputs) and one resistor thermometer with a 4-20 mA output can be connected. Two relay outputs with programmable function can be used.

Built-in real time counter can be synchronized through appropriate synchronization input. Two pulse outputs can be programmed for active or reactive power transmission. Data measured and recorded into the instrument memory can be visualized and further processed on PC after transfer through serial link (RS - 232, RS - 485).

Communication Options and Data Acquisition

support for ENVIS aaplication suite for configuration, data acquisition and analysis

open and documented protocol with free data acquisition software

support for MODBUS RTU for simple integration with 3rd party SCADA software

built-in communication port for local data acquisition, configuration and firmware upgrades

optional remote communication over serial line (RS 232/485)

See: other built-in meters and analysers, portable analysers and data loggers, ENVIS 1.1 for data analysis.